About The Department

The rapid development in Electronics and Communications initiated the inception of a Department of Electronics and Communication Engineering in 1996. Currently the department offers U.G. course as well as P.G. course:

• B.Tech (Electronics and Communication Engg.)
• M.Sc. (Electronics) (2 Years)
• Integrated M.Sc.(Electronics)(4years)

Electronics and Communication Engineering – ECE – Program outcomes, program specific outcomes and course outcomes

The department offers basic as well as following advance courses under its curriculum:

• Digital signal processing
• VLSI design & Technology
• Optical Networks etc

The department has active interaction with reputed institutes like IIT (Kanpur), HBTU (Kanpur) and IETE Kanpur local chapter. The faculty are actively involved in research in the areas of Digital Communications, Signal processing, Instrumentation, VLSI, Antenna Design, Power Electronics  and Embedded, Fibre Optics Communication.

Objectives

• To help the students and teachers to reach their full potential by providing multifaced, supportive learning and teaching environment.
• To enhance University status as a Centre of research and higher education.
• To position the University as the leading provider of outreach services in collaboration with other institutes of higher learning and research to users on and off the campus.
• To provide global access to information published worldwide in many disciplines in support of qualitative research and education at the University level.

Laboratories
There are following labs in Electronics & Communication Engineering Department:

1. Digital Signal Processing Lab
2. Analog and Digital Communication Labs
3. Microwave and Wireless Lab
4. Advance Optical Communication Lab
5. Microprocessor Lab
6. Instrumentation Lab
7. Basic Electrical and Electronics Lab
8. Digital Electronics Lab
9. Analog Integrated circuit Lab
   

Digital Signal Processing Lab:

OBJECTIVES & OUTCOMES

The student should be made familiar with:

• The implement Linear and Circular Convolution
• The implementation of Cross correlation and auto correlation
• The implement FIR and IIR filters
• The study the architecture of DSP processor.
• The demonstrate Finite word length effect

At the end of the course, the student should be able to:

• Carry out simulated of DSP system
• Demonstrate their abilities towards DSP processor based implementation of DSP systems
• Analyze Finite word length effect on DSP.
• Demonstrate the application of FFT to DSP

LIST OF MAJOR EQUIPMENTS & SOFTWARE

• DSP processor kit
• MATLAB with simulink
• Signal processing tool box

Analog and Digital Communication Labs:

• To provide knowledge based services to satisfy the needs of society and the industry by providing hands on experience in various technologies in core Analog and Digital communication field, make the student to design ,experiment, analyze, interpret in the core field of communication engineering with the help of other multi-disciplinary concept wherever applicable.
• To educate the student to disseminate research findings with good soft skill and become a successful entrepreneur.

Microwave and Wireless Communication Labs:

This lab contain equipments and trainers to design, implement and evaluate the different parameters of microwave by using klystron and gunn diode in X-band. It contain tools for implementation and analysis of wirless system as GSM,CDMA, satellite as well as GPRS,RFID,XBEE & wireless sensor network systems are used for real time applications.

Advance Optical Communication Lab:

• Student should get hands in experience working with real time instruments
• Should be exact replica of the OFC setup used by telecom operator
• Individual instruments could be used for other research application

Microprocessor Lab :

Microprocessor lab caters to the students to learn the skills of application of
microprocessor in different fields. Practices on 8085/8086 Kits and assembler on PC
using Assembly Language Programming & Interfacing with other devices is the key
feature of this lab.

Instrumentation Lab :

• Student should hand on experience  in working with real time instruments/ transducers such as
  • Temperature Transducers,
  • Optical Transducer,
  • LVDT,
  • Strain gauge,
  • liquid level,
  • load cell etc  
• Also designing virtually  different AC and DC bridges, DAC, ADC, waveform generators etc on NI multisim Software on PC.

Basic Electrical and Electronics Lab:

It is the basic lab for all the first year undergraduate engineering students, intended to give fundamental concepts of electrical and electronics through  study of various types of Electronic Devices and their application and other fundamental electrical network for understanding of the network theorem.

Digital Electronics Lab :

This lab is designed for the students to study the realization of logic gates using Transistor, Diode, & Resistor and to study different TTL IC using digital trainer kits. (e.g., flip-flop, counters and registers) etc.

Analog Integrated Circuit Lab:

This lab is primarily meant for the study of analog ICs and there application which help the students to have hand on experiences of analog trainer kits, CRO, multimeter and other analog instruments in real time which make them well versed with the analog circuit.

Major Acheivements

1. Organised Workshop on ‘AVR Architecture based Embedded Systems’ held
   in ECE Deptt, UIET, in association with BRiCS,IIT Kanpur,28th
   Jan-2nd Feb 2009.
2. Organised Workshop on ‘Electronic Circuit Designing’ held in ECE
   Deptt,UIET ,9th Feb-12th Feb 2009
3. Organised workshop for oscad on 25 th oct,2013 with help of the spoken
   Tutorial project, developed at IIT, funded by NMEICT, MHRD, Govt. of
   India.
4. Organised workshop for oscad on 25 th to 30 th Jan,2014 with help of the
   spoken Tutorial project, developed at IIT, funded by NMEICT, MHRD,
   Govt. of India.
5. Organised zonal round of RoboTryst-2014 at UIET,CSJM University
   organised by Robosapiens Technologies Pvt. Ltd. in association with Tryst-
   2014 IIT Delhi
6. In collaboration with IETE Kanpur Chapter, ÍETE student Day’ was
   celebrated on 01-02-2017
7. The DSP Lab modified & Upgraded in 2017 Under RUSSA scheme.
8. The Optical Communication Lab modified & Upgraded in 2018 Under
   RUSSA scheme.
9. A Four years Integrated M.Sc.( Electronics) course started from July 2020.

Faculty Profiles
Dr. Vishal Awasthi Coordinator,   ECE Department Qualification: Doctor of Philosophy (Ph.D.) ( AKTU, Lucknow), M.Tech.(H.B.T.I., Kanpur) Area of Specialization: Digital Signal Processing & Control System Total  Experience :-  22 years  Publications: Book & Book Chapters: 04  Journals: 13  Conferences: 09 (International-05 & National-04)
Er. Niraj Kumar Reader Qualification : Ph.D (pursuing)(Uttarakhand Technical University, Dehradun, (Uttarakhand)),M .TECH (Power Electronics& Drives), (Electrical Engineering Deptt.M.M.M. Engg. College, Gorakhpur, U.P) Area of Specialization: Power Electronics/Small Grid Technology Total  Experience : –17 Publications: Books:02 Journals: 04 Conferences: 02
Er. Anand Kumar Gupta Assistant Professor Qualification : Ph.D (pursuing), M .Tech (Gold medallist) Area of Specialization: Microelectronics & Embedded System Total  Experience : – 23.5years Publications: Journals: 02 Conferences:  07 (International)
Er.  Parul Awasthi Assistant Professor Qualification :  M.Tech (MITS,Gwalior), UGC-NET Area of Specialization – Communication & Networking Total  Experience–  17Year Publications –  Journals :-01 Conferences: 03 (International)
Er. Ajeet Kumar Srivastava Assistant Professor  Qualification : PhD.(Pursuing) ,HBTU,Kanpur,  M.Tech.(B.I.T., Mesra), UGC-NET Area of Specialization – Digital Signal Processing Total Experience – 17 years  Publications    Journals :-01 Conferences :  03
Dr. Ajay Tiwari Assistant Professor Qualification:  Ph.D.,  M.Sc.(Electronics) Area of Specialization: Solid State Total teaching experience -19+ years. Publications Journals/Conferences:  06
Er. Amit Kumar Katiyar Assistant Professor Qualification :  M.Tech.(Electronics & communication Engg.)(HBTI,Kanpur), MSc.(Electronics) Area of Specialization: Optical Fiber Communication Total Teaching experience : 15 Publications   Conferences: 03
Er.Somesh Kr.Malhotra Assistant Professor Qualification :  PhD.(Pursuing)  (HBTU,Kanpur) ,  M.Tech (AKTU,Lucknow),  UGC-NET , AMIETE, MSc.(Electronics), Area of Specialization: Optical Networks Total experience : 17+ Publications  Journals :-01 Conferences: 01
Er.Ompal                                             Assistant Professor Qualification :  ,Ph.D(Pursuing) )(Uttarakhand Technical University, Dehradun, (Uttarakhand)), M.Tech ( Electronics & communication Engg Deptt.M.M.M. Engg. College, Gorakhpur, U.P) Area of Specialization: Digital Systems Total experience : 8+ Publication  Conference: 02 Journals:02
Er. Preeti Singh Assistant Professor Qualification :  M.Tech. (Tezpur University),  UGC-NET , MSc.(Electronics)  Area of Specialization: Digital Design & Technology /Antenna Design Total experience : 8+ Publications   Journals :-01 Conferences: 02
Er. Atul Kumar Agnihotri Assistant Professor Qualification :  M.Tech (AKTU,Lucknow) Area of Specialization: Neural Network and Signal Processing Total experience : 15 Publication  Conference: 01 Journals:01

Distinguished Alumni

Dr. Richa Verma B.Tech 2000 passout Designation: Principal, Govt Leather Institute, Kanpur Contact:+91 6394702336
Dr.Shrawan Trivedi  M.Sc.Electronics 2007 passout Assistant Professor (IIT(ISM) DHANBAD) Mobile No: – +91-9532568476  Email: – shrawaniimsirmaur@gmail.com
.Dr.Awakash Dixit  M.Sc.Electronics 2007 passout He is working as a Senior Scientist at the Joint Advanced Technology Centre (JATC), IIT Delhi. Contact: Email: awakash.dixit@gmail.com Website: https://sites.google.com/view/awakashdixit
Dr. Raghvendra Kumar Chaudhary B.Tech 2007 passout Dr. Raghvendra Kumar Chaudhary is an Associate Professor of the Department of Electronics Engineering, Indian Institute of Technology (ISM) Dhanbad, India.
Mudit Awasthi B.Tech 2016 passout Designation:Senior Engineer,SanDisk(WD) ContactNo.:8354092392/9380630574 Email ID:mudit.awasthi32@gmail.com
Rachit Ranjan B.Tech 2016 passout Manager,Allahabad UP Gramin Bank
Ankit Goel B.Tech 2016 passout Senior staff Engineer,Samsung